DUCTED PELLET STOVES
New colours available:
With four outputs managed by a single engine: one local and three for the ducting up to 10 m max.
Depth of the stove: 25 cm. Upper and rear flue.
Lateral 3 key buttons display. Front scraper for cleaning the tube bundle.
Ceramic glass resistant to high temperature. Possibility of 6 daily ignitions/shut-downs.
Combustion chamber in steel. Brazier in steel.
Adjustable feet for a perfect placement on the floor. The stove requires simple maintenance.
ORTIGARA
Specifications
ORTIGARA
Technical data
Legend
Air inletWeight
74 kgNominal heat output | 7,25 kW |
Thermal power introduced | 8,14 kW |
Thermal power reduced | 4,67 kW |
Performance | 90,17% |
Dust emission | 19,8 mg/m3 (13% O2) |
Min. - max. smoke extraction | 12 Pa |
Pellet tank capacity | 15 Kg |
Pellet consumption at rated power | 1,7 Kg/h |
Pellet consumption at reduced power | 1,1 Kg/h |
CO emission at 13% of O2 at rated power | 238,6 mg/m3 |
CO emission at 13% of O2 at reduced power | 714,9 mg/m3 |
OGC emission at 13% of O2 at rated power | 7,6 mg/m3 |
OGC emission at 13% of O2 at reduced power | 26,2 mg/m3 |
Diameter air inlet | 40 mm |
Flue pipe outlet diameter | 80 mm |
Diameter of air outlet duct | 80 mm |
Maximum length of ducting | 10 m |
Nominal NOx | 149,3 mg/m3 (13% O2) |
Reduced NOx | 136,8 mg/m3 (13% O2) |
Maximum electrical power consumption during working/lightening phase | 150-380 W |
The heatable volume depends on the state of the building isolation and is calculated on 35 W/m3
With four outputs managed by a single engine:
- one local
- three for the ducting up to 10 m max