HYDRO PELLET STOVE
and ready to be connected directly to the system
The hydro stove can be connected to the existing heating system (radiators or underfloor heating).
Ceramic glass resistant to high temperature. Possibility of 6 daily ignitions/shut-downs.
Brazier in steel. Adjustable feet for a perfect placement on the floor.
- membrane expansion tank;
- safety valve 3 bar;
- drain tap;
- automatic air vent valve;
- control unit;
- LCD display;
- circulator pump.
LegendHeating delivery pipe 1”
|Nominal heat output||21 kW|
|Thermal power introduced||23 kW|
|Thermal power reduced||7,38 kW|
|Nominal heat output to water||17 kW|
|Rated thermal imput air||4 kW|
|Dust emission||13,8 mg/m3 (13% O2)|
|Min. - max. smoke extraction||9-12 Pa|
|Pellet tank capacity||30 Kg|
|Pellet consumption at rated power||4,7 Kg/h|
|Pellet consumption at reduced power||1,6 Kg/h|
|Pellet autonomy at rated output||6,5 h|
|Pellet autonomy at reduced output||18,8 h|
|Diameter air inlet||42 mm|
|Flue pipe outlet diameter||80 mm|
|Nominal NOx||119 mg/m3 (13% O2)|
|Reduced NOx||177 mg/m3 (13% O2)|
|Maximum electrical power consumption during working/lightening phase||60-300 W|
The heatable volume depends on the state of the building isolation and is calculated on 35 W/m3